DS200CSSAG1AAA  电池状态传感器板 9 针连接器

基本细节:

DS200CSSAG1AAA  电池状态传感器板 9 针连接器

DS200CSSAG1AAA包含两个 40 针连接器，高 4 英寸，宽 11 英寸。它还包含一个 4 针连接器和一个 9 针连接器。GE电池状态传感器板DS200CSSAG1AAA也有用于在板柜中安装板的孔。驱动柜设计有用于安装电路板的机架，它有匹配的孔，您可以将电路板对齐以进行安装。安装电路板时，请使用电路板随附的任何垫圈以及螺钉。

安装电路板时，不要过度拧紧螺丝，因为这可能会导致电路板破裂、碎裂或断裂。仅拧紧螺钉以提供适度的扭矩。垫圈将通过将螺钉的压力施加到电路板的更大区域来提供帮助。
在驱动器中安装主板时，请确保不要将螺钉、螺丝刀或其他耗材掉入驱动器中。如果这样做，请停止安装并找到掉落在驱动器中的项目。掉落的物品可能会损坏其他组件。如果未找到这些物品，并且您为驱动器通电，则这些物品可能会导致触电、火灾或对驱动器造成进一步损坏。

螺丝刀和所有其他工具必须经过检查和认证，才能用于电气应用。这是为了确保绝缘材料使用户免受冲击。
2PL 连接器位于 DS200CSSAG1AAA 的什么位置？
DS200CSSAG1AAA 的 2PL 连接器位于DS200CSSAG1AAA的左上角。DS200CSSAG1AAA 的 2PL 连接器是 9 针端子连接器。
DS200CSSAG1AAA有多大？
DS200CSSAG1AAA宽 11 英寸。DS200CSSAG1AAA身高 4 英寸。

DS200CSSAG1AAA

The DS200CSSAG1AAA contains two 40-pin connectors that are 4 inches high and 11 inches wide. It also contains a 4-pin connector and a 9-pin connector. The GE battery status sensor board DS200CSSAG1AAA also has holes for mounting the board in the board cabinet. The drive cabinet is designed with a rack for mounting the circuit board, which has matching holes that you can line up the circuit board for mounting. When installing the board, use any washers and screws that came with the board.

When installing the circuit board, do not over-tighten the screws, as this may cause the board to crack, chip or break. Tighten the screws only to provide moderate torque. The washer will help by applying the pressure of the screw to a larger area of the board.
When installing the motherboard in the drive, be sure not to drop screws, screwdrivers, or other consumables into the drive. If you do, stop the installation and find the item that dropped in the drive. Falling items may damage other components. If these items are not found and you power the drive, they may cause electric shock, fire, or further damage to the drive.

Screwdrivers and all other tools must be inspected and certified before they can be used in electrical applications. This is to ensure that the insulating material protects the user from impact.
Where is the 2PL connector located in the DS200CSSAG1AAA?
The 2PL connector for the DS200CSSAG1AAA is located in the upper left corner of the DS200CSSAG1AAA. The 2PL connector of the DS200CSSAG1AAA is a 9-pin terminal connector.
How big is DS200CSSAG1AAA?
The DS200CSSAG1AAA is 11 inches wide. DS200CSSAG1AAA is 4 inches tall.

如果您需要查询或购买，请将产品型号发送到我的电子邮件或直接致电我

销售经理:何经理

手机: + 86 18005021035

邮箱: 18005021035@163.com

与成都阳光熹禾合作我们提供一流的服务，实现更快的速度，交付多样化的零件!

1.在24小时内及时回复您

2.交货时间快

3.最好的服务，合理的价格

4.在生产线上工作多年，有良好的口碑

▲更多相关型号: DS200CSSAG1AAA  电池状态传感器板 9 针连接器