CS513 ABB 通信模块

产品ID:3BSE000435R1
ABB型号名称:CS513
目录说明:CS513 IEEE 802.3 LAN-Module
详细描述:CS513 IEEE 802.3 LAN-Module
技术信息:CS513 IEEE 802.3 LAN-Module
Switch in pos. 1 BIN = MB300(Std)
Switch in pos. 3 BIN = MB300E(Extended)
AC410 and SG400 ask for price.
See replacement for
AC450 3BSE091971R1
CS513AK01
AC460 3BSE091972R1
CS513AK02
海关关税号:85389091
产品净重:0.2 kg
产品没有。: 3 bse000435r1
产品类型:CS513通信接口
当前consump。(a): 5v 0.25, 24v 0.25
合计。功耗(W): 8
重量(长x高x高):23.4cm × 1.8cm × 10.8cm

CS513

在工业现场能够选择的通讯接口 CS513 3BSE000435R1 非常多，常见的是如下几种：串口232、485、以太网、GPIB、USB、无线、光纤等。1、标准串口 CS513 3BSE000435R1 通讯线路简单，只要一根交叉线即可与PC主机进行点对点双向通讯。线缆成本低，但传输速度慢、不适于长距离通讯。消费类PC机也逐渐取消了该接口，多存在于工控机及部分通信设备中。工控机在安装完系统及必要的驱动后，其串口便可直接使用，网上也有许多流行的串口调试工具可用于测试仪器。用户二次开发通讯程序也相对简单。
在AC 800M控制器系统联机之前，调查环境条件适用。特别注意以下事项：
•控制器不得暴露在超过给定值的条件下在相关技术规范中。
•控制器不得在接触强电的环境中使用干扰电机会产生超过水平的干扰允许用于设备，例如在维修工作期间。
ABB CS513 3BSE000435R1 应用DCS/PLC
•处理所有产品时，必须采取适当的预防措施静电损坏。
•控制器不得暴露在阳光直射下。重要软件检查
•使用系统的故障监测设施来防止事故或灾难。
•如有疑问，请在执行更改前进行检查重要硬件注意事项
•在任何情况下，都不要断开电源功能系统。之前，务必使用正确的系统关闭程序断开电源

CS513

Product ID:3BSE000435R1
ABB model name :CS513
Directory Description :CS513 IEEE 802.3 LAN-Module
Description :CS513 IEEE 802.3 LAN-Module
Technical information :CS513 IEEE 802.3 LAN-Module
Switch in pos. 1 BIN = MB300(Std)
Switch in pos. 3 BIN = MB300E(Extended)
AC410 and SG400 ask for price.
See replacement for
AC450 3BSE091971R1
CS513AK01
AC460 3BSE091972R1
CS513AK02
Customs Tariff number :85389091
Net weight: 0.2kg
The product does not. : 3 bse000435r1
Product Type :CS513 Communication interface
Current consump. (a): 5v 0.25, 24v 0.25
Total. Power consumption (W): 8
Weight (length x height x height):23.4cm x 1.8cm x 10.8cm
In the industrial site can choose the communication interface CS513 3BSE000435R1 is very many, the common are the following: serial 232, 485, Ethernet, GPIB, USB, wireless, optical fiber and so on. 1, the standard serial port CS513 3BSE000435R1 communication line is simple, as long as a cross line can be point-to-point two-way communication with the PC host. The cable cost is low, but the transmission speed is slow and not suitable for long-distance communication. Consumer PCS have also gradually canceled the interface, which exists in industrial computers and some communication equipment. After the installation of the system and the necessary driver, the serial port of the industrial computer can be used directly, and there are many popular serial debugging tools on the Internet that can be used for testing instruments. It is also relatively easy for users to redevelop communication programs.
Before the AC 800M controller system comes online, investigate the applicable environmental conditions. Particular attention is paid to the following:
• The controller shall not be exposed to conditions exceeding the given values in the relevant technical specifications.
• The controller must not be used in an environment exposed to strong electricity to generate interference above the level allowed for equipment, such as during maintenance work.
ABB CS513 3BSE000435R1 Application DCS/PLC
• Appropriate precautions must be taken for electrostatic damage when handling all products.
• The controller must not be exposed to direct sunlight. Critical software inspection
• Use the system’s fault monitoring facilities to prevent accidents or disasters.
• If in doubt, check important hardware considerations before making changes
• Do not, under any circumstances, disconnect the power function system. Before doing so, be sure to disconnect the power using the correct system shutdown procedure

CS513